Motor wiring

M

marcecast26

Hello everyone, I rescued this motor (image) from an old GE WRW4400SBLWW washing machine, I have been looking for information online on how to connect it but I have not found anything related to this motor (image) when I rescued it I did not find any capacitor however I found a relay ( image) and his harness (image) was unfortunately disconnected from the relay. I would greatly appreciate any useful information. I dont have the back panel wiring diagram.
Motor.JPG
Motor Side.JPG
Motor connector.JPG
Relay Front.JPG
Relay Terminals.JPG
Harness.JPG
 
Joined
May 15, 2021
Messages
397
Reaction score
47
Country
Canada
This is likely an instant reversing motor, that is, it need not a capacitor. These are complex motors to INSTANTLY reverse as the start winding has not de-energized from the circuit when the motor's run winding is yet exceeding 75% full RPM. The 3ARR18J37M is the relay, it could be from the centrifugal switch, or the reversing relay.

1 I know it sounds like a bummer, but it's probably not work keeping.
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Top