Splitting hard, dense, thick plywood panels

[kerferdude]

I have about 800 sf of some very nice, high grade, Baltic Birch plywood, finished both sides. Panel widths are all 2' and lengths vary from 2' to 8'. All panels are 1 and 3/4 inch thick.......27 ply!

I would like to cut or split the width of each panel so that I will end up with 2 panels for every 1 I now have, each with one side good and roughly half the width. I will use these panels for kitchen and bathroom cabinets, wall treatments etc. Does anybody have any good ideas on how to split or saw plywood width? Thanks!