Nordyne package unit no heat

Joined
Nov 11, 2018
Messages
1
Reaction score
0
I have a Nordyne R4GA-036K096C electric/natural gas package unit. I turned the heat on today, it ran for 2-3 minutes, blew warm air, and then started blowing cold air and would not turn off. I checked the filters, breakers, etc, and the gas. I checked the Honeywell thermostat. I disconnected the power and bypassed the two rollout switches. Turned the power back on, and the inducer fan comes on, then after several seconds, one clickis heard, and the hot surface ignitor glows. No noise can be heard at the gas valve. The ignitor glows for several seconds, then goes dark. After a bit, a click is heard, and it glows again. But there is no gas smell, and never a flame. The red LED diagnostic light is on solid. I am beginning to suspect a gas valve problem.
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Top