- Joined
- Jul 13, 2010
- Messages
- 1
- Reaction score
- 0
I'm not sure this is the right place for this thread, but it would be great if anyone could offer me a little help.
I have just produced a piece of artwork in clay that I am casting in plaster to be hung/mounted on a wall in my house.
The piece is perhaps 60x40cm in size, and I would really like to mount the plaster cast flat to the wall.
I was hoping someone may have a suggestion of how I could go about doing this, I could easily fix something into the piece while casting if that helps.
It is probably also useful to know that we have solid stone walls.
Thank you very much.
I have just produced a piece of artwork in clay that I am casting in plaster to be hung/mounted on a wall in my house.
The piece is perhaps 60x40cm in size, and I would really like to mount the plaster cast flat to the wall.
I was hoping someone may have a suggestion of how I could go about doing this, I could easily fix something into the piece while casting if that helps.
It is probably also useful to know that we have solid stone walls.
Thank you very much.