Hi All.
I had a leak from the outlet joint on my Mira88 shower valve and the leak was behind the wall tile. Using a multitool I managed to remove the tile without breaking it and I've now repaired the leaking joint. We've check for leaks and all is now perfectly sealed.
Next step is to replace the cut-out plasterboard and then fix the orignal tile back into place. I'm looking for some advice regards doing this correctly. Ideally I don't want to cover the pipework with bonding plaster inorder to fix the plasterboard in-place has this would make future repairs very difficult.
Anybody that can offer some advice would be most appreshated.
Many thanks in advanced.
I had a leak from the outlet joint on my Mira88 shower valve and the leak was behind the wall tile. Using a multitool I managed to remove the tile without breaking it and I've now repaired the leaking joint. We've check for leaks and all is now perfectly sealed.
Next step is to replace the cut-out plasterboard and then fix the orignal tile back into place. I'm looking for some advice regards doing this correctly. Ideally I don't want to cover the pipework with bonding plaster inorder to fix the plasterboard in-place has this would make future repairs very difficult.
Anybody that can offer some advice would be most appreshated.
Many thanks in advanced.
