Tile adhesive

[garygtd]

Can anyone recommend a decent tile adhesive for some large format 300 x 600 ceramic wall tiles, part of the installation will be a shower cubicle the rest standard bathroom walls. The tiles are dark grey so a dark adhesive would be better I feel. This on to cement board and bare plaster.
Thanks for replies.

 

[terryp1202]

I used an adhesive called tinset in my bathroom recently. It is a very good method to use, but there is a little more work when compared to other methods. With tinset, you have to buy bags of it and mix it with water like concrete. This produces a very strong cement type adhesive that should last for about 30 years. I used it about 3 years ago, so Iguess only time will tell how it will hold up. It was highly recommended to me by several professionals.

 

[HarrisJ5]

Use any dark (grey) latex-modified thin set mortar adhesive found at your local hardware store