Kenmore w/d combo overflows in rinse cycle

Joined
Jul 25, 2017
Messages
2
Reaction score
0
Location
Los Angeles
Hello,
I have a Kenmore washer dryer combo stack (model 11098752796) which overflows ONLY at the rinse cycle. It has been intermittently malfunctioning for a year but is consistently doing so now. As it fills with water at the start of the rinse cycle it just doesn't stop filling. I'm speculating that it could be the "water level pressure switch" in the front or the "water inlet valve" in the back. However, I'm stumped as to why it would only malfunction for the rinse cycle and no other cycle. I'm trying to narrow down the problem because parts are, of course, expensive.
Attached is a jpeg schematic and below is a link to the parts diagram.
Thank you for any help you can offer.
-ocie3
parts diagram:
https://www.searspartsdirect.com/model-number/11098752796/0582/0152000.html
 

Attachments

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Top