Optima XM6 Tamper alarm


S

Simmo

I have an Optima XM6 alarm system installed and has been working without any
trouble for the last 6 years until recently when the internal sounder has
gone off and the Tamper light has come on.I have eliminated the Tamper
circuit as being the problem by linking it out, so could the problem be a
failing back-up battery.
Thanks in advance for any help
Simmo
 
Ad

Advertisements

S

Simmo

Christian McArdle said:
out

My Optima (just bought so may be entirely different to yours) has several
tamper circuits. There is one for the bell box, one for detector wiring and
one for external keypads. There are also two internal spring tamper
switches, one visible on top of the PCB, one invisible behind it. Have you
checked them all?

Christian.

Trouble started during the hot weather before the storms,but as yet I
haven't checked the bell tamper.Maybe the bell box has moved a bit?

Simmo
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

Tamper alarm on optima g3 alarm 0
Optima XM6 Intruder detector 8
Alarm tamper return 4
24hr Tamper 2
ferolli optima 901 0
Scantronic 9448+ Tamper 0
Tamper fault on PIR 3
Demolition hammer as tamper 0

Top