Metric/Imperial Radiator tails


Dave Liquorice


I'm refurbishing a room an it would be nice to fit a thermostatic and
isolating valves, these will be new. The radiator however is old the
"22mm" pipe feeding this part of the house is really 3/4", found that
out the hard way. B-) So if there is such a thing as an "imperial"
radiator I'm bound to have one.

So will the tail from the "new" valve fit and seal in the "old"
radiator? Time is limited and I don't want to mess with draining down
etc if it ain't going to work by the normal, quick, fitting methods.


Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question