Does this problem sound like a Circuit Board ??


D

DaveinIllinois

Goodman GMNT120-5 brand new 92% gas furnace. I installed it last
week...and in mid-cycle, it abitrarily shuts off the draft inducer for
only "2 seconds" then it comes back on again to finish the rest of the
cycle. It does this just once every cycle. Each time it does it, it of
course goes thru another ignition sequence to fire up again. The temp.
rise is at 55 f. , magnehelic guage says draft inducer is creating
enough vaccuum, no limit switches are tripping that i can tell, no
loose wires/connectors evident, and no codes being indicated by
flashing red light. Power going to the draft inducer at the board
terminal is zero voltage when this occurs. Draft inducer motor is only
warm to the touch and not drawing excessive amps. Voltage is ok at
furnace. Im going back for another look/see on Tuesday.

Dave
 
Ad

Advertisements

J

JB Books

Goodman GMNT120-5 brand new 92% gas furnace. I installed it last
week...and in mid-cycle, it abitrarily shuts off the draft inducer for
only "2 seconds" then it comes back on again to finish the rest of the
cycle. It does this just once every cycle. Each time it does it, it of
course goes thru another ignition sequence to fire up again. The temp.
rise is at 55 f. , magnehelic guage says draft inducer is creating
enough vaccuum, no limit switches are tripping that i can tell, no
loose wires/connectors evident, and no codes being indicated by
flashing red light. Power going to the draft inducer at the board
terminal is zero voltage when this occurs. Draft inducer motor is only
warm to the touch and not drawing excessive amps. Voltage is ok at
furnace. Im going back for another look/see on Tuesday.

Dave
is this one of those high reli new furnaces that never break down?
seriously yes its the circuit board. probably it is cracked. i can fly
jesus or his assistant out to have a look for you if you would like.

jb books
books international mechanical specialties
 
C

CBhvac

JB Books said:
(e-mail address removed) wrote in message

is this one of those high reli new furnaces that never break down?
seriously yes its the circuit board. probably it is cracked.
LOL....or #2 or #8 on the Molex is not inserted correctly.
Moron.

i can fly
jesus or his assistant out to have a look for you if you would like.
You might just want to give Jesus your keys, since its obvious you are in
trouble by yourself.
 
C

CBhvac

Goodman GMNT120-5 brand new 92% gas furnace. I installed it last
week...and in mid-cycle, it abitrarily shuts off the draft inducer for
only "2 seconds" then it comes back on again to finish the rest of the
cycle. It does this just once every cycle. Each time it does it, it of
course goes thru another ignition sequence to fire up again. The temp.
rise is at 55 f. , magnehelic guage says draft inducer is creating
enough vaccuum, no limit switches are tripping that i can tell, no
loose wires/connectors evident, and no codes being indicated by
flashing red light. Power going to the draft inducer at the board
terminal is zero voltage when this occurs. Draft inducer motor is only
warm to the touch and not drawing excessive amps. Voltage is ok at
furnace. Im going back for another look/see on Tuesday.

Dave
What REL said, and also check your #2 and #8 plugs on the Molex...might have
one thats pushed back into the connector and not making good
contact....thats your feeds from the pressure switch.
 
D

DaveinIllinois

JB

Too bad you find it necessary to attack someones Faith in Christ, when
we live in a religious freedom country ; if you cant give a proper
answer to my questions without offensive talk., then please dont respond
to any future posts i make. You are the prime example of this trade
needing more commeraderie and professionalism .

Dave
 
P

profft

It's the opto-rectal kicking in, just PLONK his ass like everybody else
but some of the fellas , who shall remain nameless (you know who you are)
who do like to troll bait so he'll pop backup on your radar anyway from
yime-to-time. Like now, but your new and you didn't know.
 
Ad

Advertisements

T

TURTLE

JB Books said:
(e-mail address removed) wrote in message

is this one of those high reli new furnaces that never break down?
seriously yes its the circuit board. probably it is cracked. i can fly
jesus or his assistant out to have a look for you if you would like.

jb books
books international mechanical specialties
This is Turtle.

If you knew him at all. You would know he is there already and just ask him
to look at it.

TURTLE
 
S

Steve Scott

Put him in the kill file and he'll only show up when someone responds
to him. Eventually he's gone to be replaced by a new house idiot.
 
J

JB Books

JB

Too bad you find it necessary to attack someones Faith in Christ, when
we live in a religious freedom country ; if you cant give a proper
answer to my questions without offensive talk., then please dont respond
to any future posts i make. You are the prime example of this trade
needing more commeraderie and professionalism .

Dave
if your looking for comradrie stand in line to blow paul and chat to
the guys waiting there turn. learn to qoute dumbass.

jb books
books environmential
houston texas
 
M

Mike

if your looking for comradrie stand in line to blow paul and chat to
the guys waiting there turn. learn to qoute dumbass.

jb books
books environmential
houston texas

This should read "If you're looking for comraderie, stand in line to
blow Paul and chat to the guys waiting their turn. Learn to quote,
dumbass."

Learn some spelling and grammar, dumbass. Reading your posts in
particular is like reading something my six-year-old wrote.
 
O

Oscar_Lives

TURTLE said:
This is Turtle.

If you knew him at all. You would know he is there already and just ask him
to look at it.

TURTLE

My problem is that most of the time Jesus thinks I need to go somewhere
really HOT...
 
Ad

Advertisements

C

CBhvac

JB Books said:
if your looking for comradrie stand in line to blow paul and chat to
the guys waiting there turn. learn to qoute dumbass.

jb books
books environmential
houston texas

And again, it appears that Johnny Boy is suffering from a case of jism of
the fingers...

Camaraderie, Their, and QUOTE....dumbfuck.
 
P

pjm

And again, it appears that Johnny Boy is suffering from a case of jism of
the fingers...

Camaraderie, Their, and QUOTE....dumbfuck.
Now it's "books environmential" - another day, another (
miss-spelled ) company name. That'll fool 'em .....



Paul ( pjm @ pobox . com ) - remove spaces to email me
'Some days, it's just not worth chewing through the restraints,
ya know ?'

HVAC/R program for Palm PDA's
Free demo now available online !! http://pmilligan.net/palm/
Free superheat charts for 38 Ref's online at http://pmilligan.net/pmtherm/
 
C

CBhvac

Now it's "books environmential" - another day, another (
miss-spelled ) company name. That'll fool 'em .....
Its not gonna fool the TX State Tax Board...:)
or the Attorney General, since I have e-mailed them asking if he is a local
company, with a name that is not protected in LLC or corporation, and the TX
state board does not have a clue who he WAS, till now..

http://www.license.state.tx.us/acr/acr.htm
http://www.license.state.tx.us/LicenseSearch/

Self-policing of the industry...even in cyberspace...
 
J

JB Books

CBhvac said:
Its not gonna fool the TX State Tax Board...:)
or the Attorney General, since I have e-mailed them asking if he is a local
company, with a name that is not protected in LLC or corporation, and the TX
state board does not have a clue who he WAS, till now..

http://www.license.state.tx.us/acr/acr.htm
http://www.license.state.tx.us/LicenseSearch/

Self-policing of the industry...even in cyberspace...
god damn are you dumb. all your posts trying to out me for some thing
is really to much. you dont have a clue.

jb books
books mechanical services
houston texas
 
C

CBhvac

JB Books said:
"CBhvac" <stephenaddressscfrewedonpurpose@carolinabreezehvac.com> wrote in

god damn are you dumb. all your posts trying to out me for some thing
is really to much. you dont have a clue.
Nor do you...but your state is aware...enjoy while you can...

You do know that your state also thinks of advertising as you have below
without a licence is a felony????
:)

enjoy clueless fucktard.
 
Ad

Advertisements

J

JB Books

CBhvac said:
god damn are you dumb. all your posts trying to out me for some thing
is really to much. you dont have a clue.
Nor do you...but your state is aware...enjoy while you can...

You do know that your state also thinks of advertising as you have below
without a licence is a felony????
:)

enjoy clueless fucktard.

yea whatever. now go blow paul.


jb books
books mechanical services
houston texas
 
T

Tekkie

CBhvac posted for all of us....
And again, it appears that Johnny Boy is suffering from a case of jism of
the fingers...
That's a sticking point...
 
T

Tekkie

CBhvac posted for all of us....
Nor do you...but your state is aware...enjoy while you can...
Why not just call the IRS, he's probably got undeclared hackery; er I mean
income.
 
Ad

Advertisements

D

DaveinIllinois

The problem was not the molex connector where the wires go thru...but it
was the actual board that was arbitrarily interrupting power to the
Inducer motor for just 2 seconds at a time, in each cycle.

Thank you to all..who offered up possibilities.

Dave
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Top