Deck Material: Alternatives to Redwood?

Marty (archive)

Usenet Archive
Joined
Feb 7, 2004
Messages
67
Reaction score
0
What alternative to wood have you used for your deck?
Are you so happy with the price, the quality, and the outcome that you would do the same again?

Deck area will be 24 x 30 more or less with railing where the deck is not attached to the house and two set of steps. Very wet and cold, but generally not freezing winters with strong sun year round.
 

Edwin Pawlowski

Usenet Archive
Joined
Sep 25, 2001
Messages
8,269
Reaction score
0
Marty said:
What alternative to wood have you used for your deck?
Are you so happy with the price, the quality, and the outcome that you would do the same again?
Check out Ipe and mahogany. Finish with something like Penofin oil Looks sharp, lasts a lifetime.
 

LB

Usenet Archive
Joined
May 5, 2003
Messages
96
Reaction score
0
Marty said:
What alternative to wood have you used for your deck?
Are you so happy with the price, the quality, and the outcome that you would do the same again?

Deck area will be 24 x 30 more or less with railing where the deck is not attached to the house and two set of steps. Very wet and cold, but generally not freezing winters with strong sun year round.
Googling "deck materials" (in quotes) turned up a mere 13,000 hits, of which the first few look very interesting.

LB
 

Marty (archive)

Usenet Archive
Joined
Feb 7, 2004
Messages
67
Reaction score
0
Googling "deck materials" (in quotes) turned up a mere 13,000 hits, of which the first few look very interesting.

LB
Thanks, but I'm looking for personal experience and personal views on whether or not you would repeat the use of redwood-alternative decking you have personally tried.
 

BobK207

Usenet Archive
Joined
Jan 28, 2005
Messages
1,420
Reaction score
0
Marty-

I would highly reccomend avoiding face fasteners, they provide excellent locations for rot to begin.

Also I'm a big fan of SS fasteners, yeah they're kinda pricey but compared to the overall project cost it's small. Rusty fastener holes just invite rot.

I've removed SS screws & nails installed ~15 to 20 years ago & ithey are difficult to tell from new.

cheers
Bob
 

Mike Dobony

Usenet Archive
Joined
Aug 21, 2003
Messages
426
Reaction score
0
Bob_M said:
Marty;

Are original desk was about the same size as yours. After 20+ years of NE weathering the rot started to get ahead of us. It was time to replace it.

We looked at IPE and redwood but finally settled on Natural Cedar and we stained it with Sikkens Natural Cedar stain. Looks like a big piece of furniture. My research shows that the cedar should last a very long time. The finish... to early to tell.
OOPS! We have cedar and it is 15 years old and we have had to replace several rails and decking boards starting at about 5 years old. We have tried various finishes, but Thompsons has looked and worked the best. If I was to do it again, I would use composite.
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Members online

No members online now.

Forum statistics

Threads
144,906
Messages
1,592,100
Members
59,482
Latest member
lisac

Latest Threads

Top